Gradient
3 Lines

SARK GLASS UNIVERSE

3 Lines
Glass Tile Installation Process

GENERAL GLASS TILE INSTALLATION PROCESS

Store in a covered place, sheltered from dampness.

•If sheet gets wet, glass coud become unattached.

Surface Preparation

•Must be smooth, flat, vertical, firm, dry and clean.

•Draw lines on surface to help lay sheet evenly.

•Mark areas that may have a color change.

Laying

•Prepare adhesive following manufacturer's instructions.

•Used a ragged trowel no more than 4 mm.

•Lay tile top to bottom.

•You may adjust sheet using your hand.

•Press the sheet down carefully and use a rubber trowel.

•Leave sheets the same distance apart as the mosaics on the net.

Grout Lines

•Grout can be installed 24 hours after laying the tile.

•Un-sanded grout is best to avoid scratches.

•Grout lines should be clean and free of dust.

•Choose a grout color that combines with the tile or atmosphere.

•Prepare grout following manufacturer’s instructions.

•Apply grout using a rubber trowel.

•Make sure to get lines even without excess grout.

•When grout is starting to dry, wipe tile with a dry cloth.

•As soon as the grout hardens, clean with a damp cloth.

Maintenance

•Use a natural cleanser for common use.

•Do not use polish, oils, or acidic products.

•For occasional cleaning, slightly acidic products may be used.

•Make sure they are swelled out with water abundantly.

SWIMMING POOL INSTALLATION

Make sure pool is prepped for installation before you start.

Make sure glass tile is suitable for swimming pools.

•Metallic Collection is NOT suitable.

It is recommended to round off any corners or edges.

•This is not necessary.

The construction site must be sheltered from the sun and rain.

•Especially from the stagnation on the surface laid until some days passed from laying.

Do not fill pool until 20 days after laying.

For thermal baths.

•Use grout with a special epoxide mixture due to aggression from the substance in the water.

For occasional cleaning it is advisable to use slightly acidic products.

•Take into account the direction and recommended dose.

•Immediately swell it out several times with water.

During the winter season it is advisable not to empty the pool.



VULCANO CRACKLE/PETITE CRACKLE INSTALLATION

Due to the nature of this product, a few steps need to be takeen when installing.

Click here to see the PDF.