Installation Products

Mortar
Grout
Caulk
Schluter Systems
Aqua Mix
Suntouch
Shower Shelves and Benches
Star Quartz - No Seal/Stain Resistant Grout

NA 3600 Contact Plus Gray 100% Coverage Mortar
A revolutionary polymer-modified, mortar for ceramic tile installations that requires no back-buttering of tile and no beating in. NA3600 gives you 100% mortar transfer to the back of tile saving time & money.

NA3240 Rapid Flex Fast-setting Latex-Fortified mortar
A polymer-modified, quick-setting mortar for interior and exterior ceramic tile installations. The low shrinkage and quick setting characteristics of NA3500 allow tiled surfaces to be ready for grouting in under 3 hours. NA3500 is packaged in a 50 lb. bag.

NA3280 Top Flex Gray Polymer-modified premium thin set mortar

NA3280 Top Flex White
A high performance, thin set mortar for premium interior and exterior floor and wall installations of vitreous, semi-vitreous, and non-vitreous ceramic tiles, ceramic mosaics, quarry tiles, pavers and natural stone tiles. NA3333/NA3334 is packaged in a 50 lb. bag.

NA3220 Multi Flex Gray Latex Fortified Mortar

NA3220 Multi Flex White
A latex-fortified, high strength mortar for interior and exterior floor and wall installations of vitreous, semi-vitreous, and non-vitreous ceramic tiles, ceramic mosaics, quarry tiles, pavers, and natural stone tiles. NA3090/NA3091 is packaged in a 50 lb bag.

NA3200 Econo Flex Latex Fortified Mortar
A latex-fortified mortar for interior floor and wall installations of vitreous, semi-vitreous, and non-vitreous ceramic tiles, ceramic mosaics, quarry tiles, pavers, and natural stone tiles. NA3080 is packaged in a 50 lb bag.

NA3100 Floor Set Floor Thin-set Mortar
A specially formulated dry-set mortar for installations of vitreous (low absorption) ceramic floor tiles, quarry tiles and pavers over interior concrete or cement underlayment floors. NA3030 is packaged in a 50 lb bag.

NA2000 Ceramic Tile Adhesive (Type 1)
NA2000 has been specially formulated for installation of most types of ceramic tile. This installer friendly Type 1 adhesive is easy to trowel, with excellent initial grab, an extended open time. NA2000 is packaged in a 3.5 gallon pail.

Ultralite Mortar Lightweight, Polymer-modified wall and floor mortar
Ultralite mortar is a lightweight, premium grade, multipurpose thin-set mortar that also can be used for medium-bed and non sag applications. It is formulated with Easy Glide Technology for ease of application and Bio Block Technology for antimicrobial protection. Ultralite Mortar provides twice the coverage of a standard thin-set mortar. Ultralite is packaged in a 25 lb bag.

Adesilex P10 Premium-grade glass tile mortar
Adesilex P10 is a premium-grade, bright white, multipurpose thin-set mortar formulated with nonsag properties. Adesilex P10 is designed for glass tile, glass mosaic and marble mosaic. Adesilex is packaged in a 43 lb bag.

Mapelastic HPG Flexible Waterproofing and Crack-Isolation Membrane
Mapelastic HPG is a next-generation, ready-to-use liquid membrane suited for concrete, masonry, cement board and engineer-approved, exterior-grade plywood. It is designed for both commercial and residential use. It can be applied to interior horizontal and vertical surfaces using a trowel or roller, and is a highly flexible acrylic-based membrane. Mapelastic HPG has excellent compatibility with cement-based bonding materials. It can accommodate minor in-plane substrate movement and also can be used as a crack-isolation membrane (when used with MAPEI’s Fiberglass Me sh ). When used with this mesh, Mapelastic HPG is IAPMO-approved and meets ANSI A118.10 standards for use as a shower-pan liner.

Mapelastic SM Membrane 3x50 Professional Crack-Isolation and Sound-Reduction Sheet Membrane
Mapelastic SM is a highly flexible, fabric-reinforced, thin, load-bearing “peel and stick” sheet membrane system designed for crack isolation and sound control. It reduces downtime by allowing installation of setting materials immediately after the membrane is installed. Mapelastic SM has a Sound Transmission Class (STC) rating of 55 and Impact Insulation Class (IIC) rating of 67 based on a 6" (15 cm)-thick concrete slab with a drop ceiling.

Mapelastic Primer SM
Liquid Latex Primer for Mapelastic SM